Impulse VG+ Series 4 2025-VG+S4

IMPULSE VG+ Series 4 AC Drives
IMPULSE drives are designed especially for material handling applications, providing a complete package of crane-specific capabilities far beyond a general-purpose drive's functionality. The IMPULSE VG+ Series 4 can be used as a closed-loop flux vector crane control specifically designed for non-mechanical load brake hoists and high-performance traverse motions.

With hundreds of thousands of drives in operation backed by decades of experience, IMPULSE drives are the smart choice.

IMPULSE drives are designed especially for material handling applications, providing a complete package of crane-specific capabilities far beyond a general-purpose drive's functionality.

LOAD CHECK II
Load Check II continuously detects hoist overload conditions, halting upward motion and only allowing the load to be lowered. Load Check II continuously monitors the hook load, both during acceleration and constant speed, eliminating the need for load cells in most applications. It provides an auto-setup function which defines the hoist’s maximum hook load in seconds. With these control advancements, the drive no longer pauses for tests unless rated capacity is approached, providing increased productivity.

SAFE TORQUE OFF
Safe Torque Off provides a redundant hardware safety circuit that guarantees motor and brake power are removed when an E-STOP switch or safety controller opens the drive input, eliminating the need for external disconnects. This functionality is provided in a safety category 3 architecture and designed to PLd and SIL CL2 according to ISO/EN 13849-1 and IEC/EN 62061 respectively, meeting the requirements of IEC/EN 61508.

ADAPTIVE ULTRA-LIFT
Adaptive Ultra-Lift allows for hoist operation above base speed with a light load or empty hook. Adaptive Ultra-Lift continuously monitors motor torque and adjusts motor speed to operate at peak performance, improving plant safety and maximizing throughput. For example, motor speed can now be increased automatically when a magnet releases a load or gear ratios change with overwrapping drums.

BRAKE TEST
Brake Test verifies brake torque with the press of a button, capturing breakaway torque with a monitor parameter on the keypad. This valuable tool determines the condition of the brake so you can perform preventative maintenance and quickly commission the crane.

ANTI-SHOCK
Anti-Shock automatically stabilizes loads by detecting and minimizing rapid increases in motor torque, thus reducing the potential for crane damage caused by operator induced load shock.

QUICK-SET
Quick-Set is provided by the easy-to-use keypad and X-Press Programming so you get up and running right away. X-Press Programming automatically configures several commonly used parameters and features when a control method, motion, or speed reference is selected.

SAFE LIFTING
Safe Lifting features are built right in, including Torque Proving, which confirms the motor is providing enough torque to safely lift a load prior to releasing the brake. Torque Limiting prevents the crane from performing a lift that could overload the motor and cause mechanical fatigue. Brake Integrity Check tests the primary and emergency brakes to ensure they are mechanically capable of holding the load.

OPTION CARDS
Option Cards provide the drive flexibility needed with expandable AC digital input and output, DC digital and analog input and output option cards. Simplify automation and diagnostics integration with our Ethernet IP, Modbus TCP/IP, and PROFIBUS-DP option cards. The new control power supply option maintains diagnostic, I/O and communications when main power is disconnected from the drive.

IMPULSE LINK DIAGNOSTIC SYSTEM
IMPULSE Link Diagnostic System - maximizes the efficiency of your drive by providing easy parameter management right on your PC. IMPULSE Link can communicate with up to 31 drives locally or wirelessly, allowing drive diagnostics, monitoring, and programming.

50HZ COMPATIBILITY
IMPULSE VG+ drives are compatible with 50HZ voltage making them available for use in all European countries. IMPULSE drives are also CE rated when used with an EMC filter, which comes standard on all drives sold in Europe.

View Brochure

View Manual

** Horsepowers are provided for reference only and should not be used for drive sizing. Drives should be sized according to actual motor Full Load Amps (FLA).

Once ordered, we will contact you with expected shipping.